4-Channel Temperature Logger
Category:
Specifications
Details
Item Description
Available Model:
1 x IntTemp (With/Without Display)
1 x ExtTemp
2 x ExtTemp
2 x Int&ExtTemp
4 x ExtTemp
2 x ExtTemp + 2 x Binary
- Temperature Range: -30 to +80°C, -40 to +80°C logger R0110
- Accuracy: Pt-1000 external probe ±0.2°C from -50 do +100°C; Internal Sensor: ±0.4°C
- Resolution: 0.1°C large data memory 32000 values
- large dual line display with special symbols, switchable
- optional display of minimum and maximum measured values (reset of min/max memory from PC or by magnet)
- dual level alarm is enabled for each channel, alarm is indicated by blinking of the value on the LCD display or LED diode
- two alarm modes are enabled: instant or with memory (detected alarm is indicated permanently till alarm memory is
- cleared from the PC)
- robust case, easy installation, locking enabled
- low power consumption from battery, up to 7 years lifetime, easy replacement of the battery
- indication of remaining battery life
- standard temperature sensor is Pt1000, switchable to Ni1000/6180ppm external probes at range -50 to +150°C
- it is possible to combine temperature measurement with logging of contact state (e.g. door contact)
- logging start/stop is enabled in several ways: at certain time and date programmed from computer, by delivered magnet
- or depending on binary input state
- also special logging mode is enabled, when logging runs only, if some of measured values are out of adjusted alarm
- limits
- each logger is possible to describe with text of maximum 32 characters
- each channel is possible to describe with text of maximum 16 characters
- password protection is enabled to prevent unauthorized manipulation with logger
View more about 4-Channel Temperature Logger on main site